How to Build a Measured PE Rattan Profile Record
Use one identified sample, one documented measurement method and one approved frame or representative jig. Photograph the cross-section and measurement points, record width, thickness or diameter and wall structure, weigh a measured sample length, then connect the physical measurements to surface, flexibility, color reference and the actual-frame test-weave result.
Calculate grams per meter using: g/m = net sample mass in grams / measured sample length in meters. Record the net mass and measured length as well as the calculated result so another reviewer can repeat the calculation. Do not compare samples measured with different preparation, equipment or length bases without recording those differences.
Start with the Furniture Part, Not the Material Name
A profile that works on a chair back may not suit a load-bearing seat or a tight armrest curve. First identify the furniture part: seat, back, side panel, armrest, frame wrap, cabinet insert, decorative screen, basket, or replacement weaving. One furniture item may use several profile families.
Ask the workshop how the material will be tensioned and fixed. A broad flat strip can speed panel coverage, while a round cord can pass around corners more easily. For open rope designs, spacing and anchoring may matter more than nominal profile width.
Match the Profile to the Frame
Aluminum and steel tubular frames need a profile that bends without surface cracking and maintains stable tension. Wood frames and cabinet inserts may use webbing, mats, or flat strips with grooves, staples, spline systems, or concealed fixing.
Do not approve a profile only from a loose strip. Weave it on the real frame or a representative test panel and record flattening, twisting, rebound, scratching, gaps, and workshop handling.
Choose Dimensions and Surface Together
Width, thickness, diameter, wall thickness, and surface texture form one specification. A wider flat strip may cover faster but can be harder to turn around a small radius. A hollow round profile can look substantial but may collapse if its wall is too thin for the weaving tension.
For repeat production, keep a cross-section photo or drawing, approved physical sample, item code, surface note, flexibility direction, measured grams per meter, and application photo together.
Buyer Approval Sequence
Define the furniture part, select a profile family, confirm measurable dimensions, review surface and color, set the UV evidence requirement, test weave on the actual frame, confirm roll and packing standards, and record the approved sample code. This sequence prevents a visually attractive loose sample from becoming a production problem.
Limitations
This matrix is a selection starting point, not a production acceptance standard. Profile names are not standardized across suppliers, and terms such as rope, hollow, seagrass-look, and brushed can describe different constructions. Final approval requires measurable dimensions, samples, and actual-frame testing.
Measured Product Evidence Record
Blank reusable schema only — no real Greenlife measured record or readings are published.
NOMINAL CATALOG VALUE
Keep nominal width, thickness, diameter and profile wording as the intended product specification; do not present them as a measured sample result.
MEASURED SAMPLE RESULT
Keep readings, instrument details, sample identity and calculation fields blank until a real Greenlife measurement record is available.
A nominal catalog dimension describes the intended product specification. A measured sample result describes only the identified sample under the recorded method. Neither should be silently substituted for the other.
| Item Code | Sample ID | Profile Family | Cross-Section | Nominal Width | Nominal Thickness | Nominal Diameter | Measurement Point | Reading 1 | Reading 2 | Reading 3 | Instrument | Instrument Resolution | Sample Length | Net Sample Mass | Calculated g/m | Measurement Date | Record Source | Limitations |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — |
Profile Selection Matrix
Use the application and frame geometry to shortlist a profile, then confirm the exact construction with a measured sample.
| Profile family | Typical furniture use | Frame / geometry fit | Visual effect | Key buyer checks |
|---|---|---|---|---|
| Flat strip | Chair seats, sofa panels, table edges, cabinet fronts | Broad and moderately curved areas | Clean, efficient coverage | Width, thickness, edge condition, surface, tension |
| Round cord | Frame wrapping, chair backs, decorative weaving | Curves, corners, tubular frames | Traditional wicker line | Diameter, solid/hollow construction, flexibility, rebound |
| Half-round | Armrest edges, raised lines, curved backs | Curved surfaces with a flatter contact side | More depth than a flat strip | Width, height, flat-side fit, bending behavior |
| Hollow profile | Rounded sofa arms, decorative volume, some chair frames | Medium curves where weight control matters | Fuller shape with lower mass | Outer size, wall thickness, collapse resistance |
| Rope profile | Open backs, lounge chairs, daybeds, modern seating | Open layouts and anchored spans | Modern architectural lines | Width/diameter, core construction, stretch, anchoring |
| Twisted profile | Decorative chair backs, baskets, accent panels | Curves and open decorative patterns | Handcrafted, natural-look texture | Twist consistency, softness, snagging, color range |
| Brushed / wood-look | Premium sofas, feature panels, natural-look collections | Same geometry as the base profile; surface must be tested | Textured, higher visual depth | Texture depth, abrasion, gloss, repeat color |
| Webbing / mat | Cabinet inserts, screens, room dividers, panel replacement | Flat openings and framed panels | Consistent repeating pattern | Pattern, opening size, roll width, edge condition |
Current Evidence Status
Greenlife-specific profile measurements, grams-per-meter records, cross-section photographs, and furniture application examples will be added only after the relevant samples, measurement method, and product scope have been verified.
- Cross-section photos for each profile family
- One real furniture application photo per profile family
- Measured dimensions and grams per meter for representative samples
- Workshop test-weave photographs
- Approved sample and batch-record example
Buyer FAQ
Which PE rattan profile is best for chair seats?
Flat strips are commonly used because they cover surface area efficiently, but the final choice depends on seat structure, weaving pattern, tension, and comfort. Test the selected profile on the real seat frame.
Can one profile be used for an entire furniture item?
Sometimes, but many designs use different profiles for seats, backs, edges, frame wrapping, and decorative details.
Is a hollow profile always lighter than a solid profile?
It can reduce mass at a similar outer dimension, but measured grams per meter, wall thickness, formulation, and cross-section determine the actual result.
How should buyers compare two suppliers?
Request samples with equivalent dimensions and test them on the same frame. Compare size, grams per meter, surface, flexibility, tension stability, roll standard, and repeat-order records.
Should UV grade change the profile choice?
UV requirements apply to the offered formulation, color, and profile. Confirm the evidence scope rather than assuming one UV statement covers every product.
Related Products and Guides
Sources and Review
Technical references describe methods and buyer checks; they do not prove a Greenlife product result. Greenlife-specific evidence remains identified above until it is supplied and approved for publication.
- Greenlife synthetic rattan specification guide
- Greenlife flat vs round PE rattan guide
- Greenlife profile comparison guide
Author and reviewer: Greenlife Rattan buyer-support team. Published and last reviewed: 2026-10-05.
Request a Measurable Sample Proposal
Send the furniture part, frame photo, target profile, color reference, exposure, and expected quantity. Greenlife can prepare a sample discussion without replacing buyer approval or actual-frame testing.
Send Sample Request