Choose the Calculation Method
Measured g/m is the default because it uses the approved sample's actual mass and construction. Geometry modes are planning estimates for simple profiles and do not validate a formulation or production roll.
Calculator Formulas
| Mode | Inputs | Formula or output |
|---|---|---|
| Measured g/m | Net weight kg and measured g/m | Length m = net kg × 1,000 ÷ g/m |
| Target length | Target length m and measured g/m | Net kg = length × g/m ÷ 1,000 |
| Solid flat estimate | Width mm, thickness mm, density g/cm³ | g/m ≈ width × thickness × density |
| Solid round estimate | Diameter mm and density g/cm³ | g/m ≈ π × diameter² ÷ 4 × density |
| Hollow round estimate | Outer and inner diameter mm and density | g/m ≈ π × (OD² - ID²) ÷ 4 × density |
| Roll count | Required length, usable roll length, waste % | Round up(required × (1 + waste) ÷ roll length) |
Net Weight Matters
Use material weight after excluding the core, inner bag, carton, straps, pallet, and other packing. If only gross weight is available, request a verified tare weight instead of guessing.
Density Must Match the Real Formulation
The default examples in the supplied test plan use 0.93 g/cm³ only as an input example, not a Greenlife product declaration. Enter the density applicable to the offered compound, or use measured g/m.
Use Results for Planning, Then Verify
Check a measured sample length, net mass, scale method, production roll label, and usable roll length before purchasing. Theoretical estimate; final values must be based on measurements and the approved sample.
Current Evidence Status
The following Greenlife-specific records are not currently published: representative g/m data, scale and sample-measurement photos, an actual roll label, a tolerance policy, and validation against known production rolls. Product-specific claims will be added only after the records and test scope have been verified.
Buyer FAQ
How many meters are in a PE rattan roll?
Divide net material weight in kilograms multiplied by 1,000 by the approved sample's measured grams per meter.
Should gross package weight be used?
No. Subtract cores, bags, cartons, pallets, and other packing so the calculation uses net material weight.
Can theoretical density replace measured g/m?
Only for early estimates of simple solid profiles. Use measured g/m for hollow, twisted, rope, brushed, foamed, or irregular profiles.
Why can calculated and actual roll length differ?
Profile variation, formulation density, foaming, wall structure, winding, scale accuracy, moisture, and net-weight measurement can affect the result.
How is roll count rounded?
Apply the documented allowance to required length, divide by usable length per roll, and round up to a whole roll.
Related Tools and Guides
Sources and Review
Formulas follow unit conversion and cross-sectional geometry. They do not establish the density or construction of a Greenlife product. Author and reviewer: Greenlife Rattan buyer-support team. Published and last reviewed: 2026-07-31.