Separate Color from Profile, Surface, and Gloss
The same pigment can appear different on flat, round, brushed, matte, glossy, or twisted profiles. Approve color on the final cross-section and surface rather than transferring approval from a different profile.
Mixed-tone and gradient products also need an approved range and distribution pattern; a single small point measurement cannot describe the whole visual effect.
Build a Physical Approval Hierarchy
Use a labeled master sample as the central reference. Where appearance risk is high, add approved upper and lower limit samples so both buyer and factory can recognize the acceptable boundary.
Assign every reference a sample ID, profile version, color name, approval date, approver, and storage location. Photos help records, but screens do not replace retained physical samples.
Use Controlled Viewing Conditions
Agree the relevant light source, viewing angle, background, and distance. Review loose strips and a woven panel because shadow, tension, overlap, and neighboring frame colors can change the final appearance.
If the buyer has no formal light booth requirement, document the practical viewing setup used for approval instead of presenting it as a standardized laboratory method.
Add Instrumental Measurement Only When It Is Controlled
CIEDE2000 is a color-difference calculation method, not a universal acceptance threshold. An instrumental rule is useful only when instrument model, geometry, illuminant, observer, aperture, sample presentation, repeat readings, and calculation formula are agreed.
Greenlife has not published a product-specific Delta E limit or colorimeter method. Any product-specific tolerance value will be added only after the measurement method, instrument, lighting conditions, sample scope, and supporting records have been verified.
Sample the Production Batch
Record the production batch and selected roll IDs, then compare representative samples with the approved reference. Keep results with the item code, production date, packing labels, and retained samples so repeat orders can be traced.
Write the Acceptance Rule Clearly
A useful rule states the approved physical references, final profile and surface, viewing conditions, any instrument method, number and location of measurements, woven-panel review, sampling plan, decision owner, and handling of borderline results.
Color Approval Record
The approval output should connect the buyer reference with the factory record and the final application.
| Approval item | Buyer provides | Factory records | Acceptance output |
|---|---|---|---|
| Color reference | Physical master sample or approved furniture part | Sample code and retained duplicate | Master Sample ID |
| Acceptable range | Limit samples or written variation rule | Boundary sample set | Approved range |
| Profile and surface | Size, cross-section, texture, gloss direction | Production specification | Profile version |
| Lighting | Relevant viewing conditions | Viewing booth or documented setup | Lighting record |
| Instrumental method | Agreed only when required | Instrument, geometry, illuminant, formula | Delta E report |
| Batch sampling | Required lot or roll sampling expectation | Selected roll numbers and results | Batch release record |
| Woven review | Frame or panel design | Test-panel photos and comments | Final application approval |
Current Evidence Status
The following Greenlife-specific records are not currently published. Product-specific claims will be added only after the relevant documents, samples, measurements, and test scope have been verified.
- Labeled master and limit sample photographs
- Controlled-lighting review area and documented viewing conditions
- Actual colorimeter model and method, if Greenlife uses one
- Sample batch record and selected roll IDs
- Woven-panel comparison photographs
- Written acceptance rule used by Greenlife
Buyer FAQ
What Delta E tolerance should PE rattan use?
There is no universal value. The buyer and factory must agree a threshold for the specific color, profile, surface, instrument method, lighting, and application.
Can a phone photo approve PE rattan color?
No. Photos are useful for discussion, but display settings, lighting, compression, and camera processing prevent them from defining a repeatable production standard.
How should mixed-color PE rattan be approved?
Approve a physical range, distribution pattern, final profile, and woven panel. Record boundary samples when the program needs tighter repeat control.
Why can color look different after weaving?
Curvature, overlap, tension, surface direction, shadows, and the frame color can change perceived color. Review the final material on a representative panel.
Is instrumental measurement enough by itself?
No. It can support control, but textured and mixed-tone profiles also need visual review under documented conditions and on the intended application.
Related Products and Guides
Sources and Review
Technical references describe methods and buyer checks; they do not prove a Greenlife product result. Greenlife-specific evidence remains identified above until it is supplied and approved for publication.
- CIE Colorimetry Part 6: CIEDE2000
- Konica Minolta explanation of Delta E
- Greenlife samples and custom colors
Author and reviewer: Greenlife Rattan buyer-support team. Published and last reviewed: 2026-07-31.
Request a Measurable Sample Proposal
Send the furniture part, frame photo, target profile, color reference, exposure, and expected quantity. Greenlife can prepare a sample discussion without replacing buyer approval or actual-frame testing.
Send Sample Request