Direct Answer
Learn how furniture factories should prepare PE rattan samples, frame photos, color targets, UV requirements, and test weaving before bulk synthetic rattan orders.
Buyer guide overview
A good sample request saves time, reduces wrong quotations, and prevents production mistakes. Many synthetic rattan problems happen because the buyer asks for “similar color” or “normal outdoor grade” without enough technical details. Before a bulk PE rattan order, prepare a sample request that helps the supplier quote and develop the correct material.
Prepare the basic application information
Tell the supplier how the rattan will be used. Is it for chair seats, sofa panels, wrapped frames, cabinet door inserts, decorative screens, room dividers, or outdoor loungers? The application affects profile selection, flexibility, UV requirement, and packing.
If possible, send photos of the finished furniture or the frame. A frame photo helps the supplier understand curves, corners, spacing, and weaving difficulty.
Send profile details
For profile development, send width, thickness, shape, texture, and any available sample code. If you do not know the exact size, measure your current material with calipers or send a physical sample for matching.
Do not only send a photo with a ruler. Photos are helpful, but physical samples are more reliable for profile, surface feel, and flexibility.
Confirm color and UV requirement
Send the target color sample or previous approved material. Also tell the supplier where the furniture will be sold and used. A covered patio set and a poolside resort lounger may require different UV planning.
If your customer requires a specific UV test or performance level, include that information at the sample stage.
Request enough material for test weaving
A small color chip may be enough for color review, but it is not enough for production approval. Ask for enough material to test weave on the real frame or a sample panel.
Test weaving helps identify whether the rattan bends correctly, whether the tension is comfortable, and whether the color looks right after weaving.
Record the approved sample
After approval, record sample code, color, profile size, surface, UV grade, roll packing, date, and supplier contact. Use the same information in your purchase order and reorder records.
Buyer takeaway
Prepare your frame photo, target color, profile size, UV requirement, and estimated quantity, then contact Greenlife to request PE rattan samples for review and test weaving.
Application and Specification Decision Table
The checks below turn the guide's main points into a short application and specification review for sample approval.
| Decision area | What to verify | Buyer action |
|---|---|---|
| Buyer guide overview | A good sample request saves time, reduces wrong quotations, and prevents production mistakes. | Many synthetic rattan problems happen because the buyer asks for “similar color” or “normal outdoor grade” without enough technical details. |
| Prepare the basic application information | Tell the supplier how the rattan will be used. | If possible, send photos of the finished furniture or the frame. |
| Send profile details | For profile development, send width, thickness, shape, texture, and any available sample code. | Do not only send a photo with a ruler. |
| Confirm color and UV requirement | Send the target color sample or previous approved material. | If your customer requires a specific UV test or performance level, include that information at the sample stage. |
Buyer Decision Points
Approve the material only after the guide's relevant checks are tied to the actual product, frame, market, and repeat-order record.
- Buyer guide overview
- Prepare the basic application information
- Send profile details
- Confirm color and UV requirement
Factory Process or Test Method
Start with the buyer's application and reference sample, document the relevant profile, color, performance, and packing requirements, then compare the production sample on the intended frame before bulk approval.
Common Mistakes
Common errors are approving from a screen photo alone, omitting the actual frame or exposure condition, treating a color name as a repeatable standard, and leaving packing or batch identification until after production.
Related Products and Categories
Compare the linked material families and product codes against the application and sample checks described above.
Buyer FAQ
These answers explain how to apply the guide without treating it as a substitute for buyer-specific testing.
What should I send when requesting PE rattan samples?
Send application, frame photo, profile size, target color, UV requirement, estimated quantity, and delivery plan.
Is a photo enough for color matching?
A photo helps communication, but a physical color sample is more reliable because screens and lighting can change color appearance.
How much sample material should I request?
Request enough material for both visual review and test weaving on the actual frame or panel.
Why is test weaving important?
A rattan strip can look correct on the roll but feel too hard, too soft, or visually different after weaving.
Limitations
This guide supports purchasing and sample review, but it does not replace testing on the buyer's actual frame, exposure conditions, production equipment, or acceptance standard. UV test hours are laboratory test conditions and are not a fixed conversion to outdoor service years.
Sources and Review
Primary source: Greenlife Rattan factory process, sample approval, quality-control, and packing records described on this website.
Reviewer: Greenlife Rattan production and buyer-support team. Date published: 2026-07-14. Last reviewed: 2026-07-30.
Need a material recommendation?
Send the product application, target market, sample photo, or color reference and PT Greenlife Polyrattan Indonesia can help suggest a practical material path.
Send Sample Request